MNTABLE - Calibration table data import

This import template allows editing:

• Calibration table data

To insert this item, the standard documented below must be followed.

Insert, edit, and delete calibration data

Column	Required	Type	Precision	Description
OIDINTERFACE	X	TEXT	32	Primary key - Identifies an item to be imported into SoftExpert Suite.
FGIMPORT	X	NUMERIC	2	Import status: 1 - New; 2 - In progress; 3 - Finished; 4 - Error.
CDISOSYSTEM	X	NUMERIC	10	Code of the system for which the integration will be performed: 126 - Code of the SoftExpert Maintenance component.
FGOPTION	X	NUMERIC	2	Code of the operation to be performed: 11 - Edit.
NMFIELD01	X	TEXT	255	Plan ID #.
NMFIELD02	X	TEXT	255	Certificate #.
NMFIELD03	X	TEXT	255	Calibration table name.
NMFIELD04	X	TEXT	255	Indicates whether it is pre-calibration or calibration: 1 - Calibration; 2 - Pre-calibration.
NMFIELD05	X¹	TEXT	255	Systematic error or bias [Bias].
NMFIELD06	X¹	TEXT	255	Total deviation [Fges].
NMFIELD07	X¹	TEXT	255	Deviation value [Fe].
NMFIELD08	X¹	TEXT	255	Expanded uncertainty value [U95].
NMFIELD09	X¹	TEXT	255	Ascending error value [Ascending error].
NMFIELD10	X¹	TEXT	255	Descending error value [Descending error].
NMFIELD11	X¹	TEXT	255	Range error value [Range error].
NMFIELD12	X¹	TEXT	255	Average value [Average].
NMFIELD13	X¹	TEXT	255	Highest point reading value [Highest reading].
NMFIELD14	X¹	TEXT	255	Lowest point reading value [Lowest reading].
NMFIELD15	X¹	TEXT	255	Hysteresis value [Hysteresis].
NMFIELD16	X¹	TEXT	255	FT value [FT].
NMFIELD17		TEXT	255	Process ID #
NMFIELD18	X¹	TEXT	255	Complementary variable. Format: [Variable ID #]=VALUE; [Variable ID #]=VALUE; Example: g=9.81; UPAD=0.01;
NMFIELD19	X²	TEXT	255	Subjective table calibration result: 1 - Approved; 2 - Rejected.
NMFIELD20	X²	TEXT	255	Subjective table pre-calibration result: 1 - Approved; 2 - Rejected.
NMFIELD21		TEXT	255	Subjective table comments.

info

Note:

• X¹ - Field required if it is part of the formula.
• X² - Field required if the table is subjective.